How do you adjust the Head Up Display (HUD) in your Toyota Venza?

 The HUD display is only available in Toyota Venza Limited edition.

If the HUD has been set up, the display is on whenever the Power is ON.


The height of the display and its brightness can be controlled. The height may need adjustment depending on the seat position.

The following screen shots show how this may be adjusted:


Step 1: You need to get to the "Settings" on the large display as shown. When you press "i" (left bottom shown) the "Settings" control will be available. 

The "Settings" gives access to the "Meter Control Switches" These are available on the left side of the steering wheel.

The Left-Right < > control switches the various functions such as 'HUD". The "UP" and "DOWN" allows other selections. The return symbol above the 'Phone" icon returns to previous.

When "Settings" is chosen this is what you will see on the "Instrument Cluster" as shown.

Step 2: Using the left (<) and right (>) controls you can move on the 4 functionalities shown. There are more than four functionalities. Pressing the right control after the rightmost marked PCTA gets you to the next set of functionalities.

Step 3: When you come to 'HUD" as shown above you can turn on or off the HUD control. If you HOLD down on "OK" in the "Meter-control" on the steering wheel, you get the sub-menu under "HUD" as shown.

Step 4: Now you can work on left (<) and right (>) controls to adjust brightness of the display and using the top and down arrows you can raise or lower the HUD. While making these adjustments you should be seeing the HUD on the wind screen.

After the adjustment you can get back to "Settings" and back to Info.

The HUD display is shown here. The outside light is strong when this photo is taken but you can see the HUD.

This next one is cropped from the above.

You can see the 'lanes' and it is in 'Parked (P)" position